JNM Anchor Fastners

Approx. 700 / Bottle Get Latest Price

Product Brochure

Pure Epoxy Styrene Free

Good Quality and High Strength

Specification

Material: Pure epoxy resin

Size: 400ml,

Mixing ratio: 3:1(400ml);

Mixing color: Orange(400ml)

 

Shelf life: 18 months.

 

Standard package: One cartridge with two mixer

 

Other accessory: Mixer, caulking gun,

 

Application

 

Tropical area.

 

Anchoring in large hole diameter, deep

 

holes and diamond drilled holes

 

Large construction sites (infrastructure, civil projects, bridge, tunnel).

GU-500 provides rapid cure with adequate

 

Features

 

Non-Drip.

 

Styrene free and low odor with VOC(Volatile Organic Compounds).

No shrinkage, pressure and expansion.

 

High grip force, high adhesive force.

working time in temperate climates. 

Approx. 500 / Piece Get Latest Price

Product Brochure
 Application in Uncracked concrete, Solid Brick, Hollow brick, with commercial threaded rods.

High bending and pressure strengths.

For complete details please refer to PDF attached.

Approx. 1,200 / Piece Get Latest Price

Product Brochure

• For 390ml and 400ml Side by side tube
• Color- Blue
• Cartridge ratin- 3:1
• Heavy Duty, Made in Taiwan

Approx. 1,200 / Piece Get Latest Price

Product Brochure

• For 380ml and 410ml Coaxial tube
• Color- red
• Handle- Aluminium Alloy
• Carriage- Metal

Approx. 1,200 / Piece Get Latest Price

Product Brochure

• Best Suitable for 235ml, 350ml, 360ml, 390 ml Side by side Tubes.
•  Cartridge Ratio - 10:1
• Color Red
• Made In Taiwan, heavy Duty.

Approx. 2 / Piece Get Latest Price

Product Brochure

Drop In Anchor

 

JNM Drop-In Anchors are internally threaded anchors for bolts and threaded rods. These are zinc plated steel tubular expansion shield and a solid, cone-shaped expander plug. The shield has four equally placed slots for a portion of its length. The shield also has a smooth, flangeless top that allows for either flush or countersunk installation. The bottom lip of the shield is tapered to allow maximum depth and holding power.

 

Application

1.      Pipe suspension

2.      Air-conditioning and Ventilation Installations

3.      Drain Covers

4.      Sprinkler Systems

5.      Consoles

6.      Platforms

7.      Plumbing

8.      Steel Constructions

9.      Gratings

10.   Cable Trays

11.   Facades

12.   Suspended Ceilings

Installation

How to Install :

1.      Select the right plug size.

2.      Drill a hole in the concrete using a hammer drill and carbide tipped masonry drill bit matching the bit size with the outside diameter of the drop-in anchor being used. Make sure the hole depth exceeds the minimum embedment depth.

3.      Clear all the debris or drilling dust from the hole.

4.      Drive the anchor into the hole until it is flush with the surface of the concrete.

5.      Using proper sized setting tool, expand the anchor setting tool into the anchor followed by several hammer blows.

6.      Proper installation can be verified when the shoulder of the setting tool is flush with the top of anchor.

7.      Below Surface Installation:

1.       Drill hole deeper than anchor length.

2.      Thread bolt into anchor.

3.      Hammer anchor into hole until bolt head is at desired depth.

4.      Remove bolt and set anchor with setting tool.

Approx. 50 / Piece Get Latest Price

Product Brochure
Chemical Anchor 5.8 available in Various dia and length. Hex head Chemical Anchor of Superior Quality, Similar to fischer FTR, RGM and Hilti HAS-U

Approx. 2,500 / Piece Get Latest Price

Product Brochure
Suitable for 390ml, 580ml, 585ml injection Mortar. Heavy Duty Made In Taiwan.

Approx. 40 / Piece Get Latest Price

Product Brochure
Chemical Anchor Stud grade 5.8. High quality product for your chemcial anchoring purpose.

Approx. 20 / Piece Get Latest Price

Product Brochure

Chemical Stud

JNM CSA are high performance anchor system for use in safety critical applications. The assembly works on the principle of adhesion between concrete and chemical (resin).

Application

1.      Light Duty Applications: bathroom fixings, window shutters, satellite dishes, air conditioners, outside lights, hanging cabinets, etc.

2.      Vibration/External Force Applications: Vibrations due to wind or machine operation can be overcome through the use of Chemical Anchor.

3.      Heavy Duty Applications:  I-beams, balconies and railings.

4.  Problematic Fixings: 

       4.1 Problematic applications include wet and underwater.

       4.2 Cracked concrete is another problematic application.

       4.3 fixing a load with close axial or edge distance.

       4.4 heavy loads that must be fixed close to the edge without creating any internal pressure.

5. Post-Installed Rebar: Post-installed rebar is an application that can only be completed using Chemical Anchor.

Technical Data