Fischer Fixing Systems

Approx. 1,950 / Piece Get Latest Price

Product Brochure
Injection mortar FIS SBThe concrete all-rounder

The silane technology of the fischer injection mortar FIS SB enables a really high bond strength and therefore a really high load level. The European Technical Approval for cracked and non-cracked concrete and for seismic loads offers added safety. The fischer injection mortar FIS SB is suitable for use with the system components for fixation both inside and outside.The variable anchorage depths optimise the installation time and use of materials. The application temperatures range from -15° to +150° C depending on the mortar variant.

Approx. 50 / Piece Get Latest Price

Product Brochure
Bolt anchor FAZ IIFor highest demands. Powerful and flexible.

The fischer bolt anchor FAZ II is a steel anchor for the highest requirements. Heavy loads can be secured in cracked concrete using the steel anchor. Thanks to its easy installation, the FAZ II can be used extremely flexibly. The tried-and-tested expansion clip safely introduces the loads into the concrete and enables top load-bearing capacity. The steel anchor is ideal for the anchoring of railings, cable trays and cantilevers, for example.

Approx. 700 / Piece Get Latest Price

Product Brochure
Injection mortar FIS PThe reliable injection mortar for anchorings in masonry

The fischer Injection mortar FIS P is a polyester resin mortar for the economical fixing of gratings, cantilevers and handrails in masonry which do not require approval.

Approx. 900 / Piece Get Latest Price

Product Brochure

The fischer high-performance mortar FIS V Plus is the universal all-rounder for the highest requirements. The styrene-free vinyl ester hybrid mortar with its numerous fixing elements is approved for fixations in cracked and non-cracked concrete as well as in masonry. 

Approx. 60 / Piece Get Latest Price

Product Brochure
Top Features

• The FBN II achieves maximum load-bearing capacity with standard anchorage depth. This means: fewer fixing points and smaller anchor plates.
• If the reduced anchorage depth is used, then this lowers the drill hole depth and simplifies installation.
• Component tolerances are balanced out with the long thread. In addition, FBN II is also suitable for stand-off installations. This increases flexibility.
• Simple assembly due to few taps and minimal slippage.
• The drive-in pin protects the thread from damage. This saves time during installation and removal.

Approx. 33 / Piece Get Latest Price

Product Brochure
Frame fixing SXR The efficient with short expansion element

The fischer frame fixing SXR is a plug made from high-quality nylon. Thanks to its special plug geometry, the SXR can be used in solid and hollow building materials. Due to the low anchorage depth of just 50 mm, the frame fixing can work particularly cost-effectively. The low drill hole depth saves time and reduces bit wear. 

Approx. 2,500 / Piece Get Latest Price

Product Brochure
Injection mortar FIS EM PlusThe powerful injection mortar for rebar connections and cracked concrete

The fischer injection mortar FIS EM Plus is a high-quality epoxy mortar for top load-bearing capacity in cracked and non-cracked concrete and for seismic applications in performance categories C1 and C2. It is suitable for fixations of shear connectors for concrete layers, tall shelvings, and heavy steel constructions both inside and outside. 

Approx. 1,400 / Piece Get Latest Price

Product Brochure
Epoxy mortar FIS EBThe basic epoxy mortar for applications in concrete

The fischer injection mortar FIS EB is an economical epoxy resin mortar for standard applications in cracked and and non-cracked concrete and for rebar connections. It is suitable for fixing heavy loads both inside and outside.

Approx. 125 / Piece Get Latest Price

Product Brochure
Threaded rod RG MThe fischer threaded rod with chamfer

The fischer anchor rod RG M is a system component for use with the fischer resin capsules RSB and RM II and the fischer injection mortars FIS SB, FIS EM, FIS EB, FIS V, FIS VL, FIS P Plus, FIS P, and FIS GREEN. Due to the oblique edge, it is particularly suitable for use with the resin capsules RSB and RM II. The extensive assortment in diameters M8 - M30 and in different steel grades enables extremely diverse applications. The system is particularly suitable for the cost-effective fixation of railings, steelwork constructions, and advertising systems both inside and outside. The RG M is set with the bonded anchor setting tool and a hammer drill using rotating and hitting motions. During the resin capsule setting process, the capsules are destroyed by the characteristic oblique edge and are mixed, and the mortar is activated. The approvals of the various resin capsules and injection mortars must be observed.

Approx. 25 / Piece Get Latest Price

Product Brochure
The fischer bolt anchor FWA is an economical solution for all applications where an approved fixation is not required. The FWA is offered in zinc-plated steel and hot-dip galvanised steel with an imperial thread. The bolt anchor can be used with two anchorage depths. The standard anchorage depth guarantees a high load-bearing capacity. This means that fewer fixing points and smaller anchor plates are required. The reduced anchorage depth reduces the drill hole depth. This saves time during the installation and increases flexibility.Advantages

• The standard anchorage depth achieves high load-bearing capacities. This means that fewer fixing points and smaller anchor plates are required.
• The reduced anchorage depth reduces the drill hole depth. This minimises the amount of time needed for installation whilst increasing flexibility.
• Available with metric and imperial threads

Approx. 6.30 / Piece Get Latest Price

Product Brochure
Hammerset anchor EA-NThe cost-effective hammerset anchor without approval for multiple fixings in non-structural systemsThe fischer hammerset anchor EA N is an internal thread anchor made from zinc-plated and stainless steel. The hammerset anchor is ideal for the multiple fixation of non-structural systems that do not require approved anchorage. The assembly of the internal thread anchor is extremely cost-effective thanks to the low embedment depth, fast hammerset installation, and direction-controlled screwing process. The EA N is mounted with the hammer flush to the base material. With the setting tool EA-ST, the sleeve is expanded and braced against the drill hole wall through the driving in of the internal pin. No torque should be applied to the screw to enable correct expansion. 

Approx. 15 / Piece Get Latest Price

Product Brochure
The fischer Hammerset anchor EA II is an internal threaded anchor made of zinc-plated steel. The Hammerset anchor is set flush to the surface of the anchoring base using the hammer. With the setting tool EHS Plus or the machine setting tool EMS the sleeve is expanded by driving in the internal rod and expands against the drill hole wall. For correct expansion to take place, no torque must be applied to the screw or the threaded rod. The fischer Hammerset anchor EA II is ideal for fixing sprinkler systems, gratings, and consoles in internal areas with approval.

Approx. 60 / Piece Get Latest Price

Threaded rod FTRThe cost-effective threaded rod with oblique edge without approval

The fischer threaded rod FTR is a cost-effective system component without approval for the fischer resin capsules RSB and RM II and for fischer injection mortars. For single fixations, the application with the pre-portioned resin capsule is particularly cost-effective

Approx. 6 / Piece Get Latest Price

Product Brochure
Hammerfix N-SThe hammer-in plug for a simple, fast and economical installation

The fischer Hammerfix N-S with countersunk head consists of a high-quality nylon plug and a nail screw made from zinc-plated or stainless steel. These are pre-mounted for a fast installation process. The Hammerfix is inserted through the attachment part in a time-saving push-through installation. When the nail screw is hammered in, the plug sleeve expands and creates a secure anchoring in the building material. The fischer Hammerfix N-S with countersunk head is ideal for the fixing of wood constructions, plaster and wall connections, and cable and pipe clips in all building materials.

Approx. 20 / Piece Get Latest Price

Product Brochure
Sleeve anchor FSL-BThe cost-effective high-performance anchor for push-through installations in non-cracked concrete

The fischer sleeve anchor FSL is an internal threaded anchor made from zinc-plated steel. Thanks to its high shear load resistance, the FSL is ideal for the anchoring of structural and temporary loads in non-cracked concrete. The variants with bolts, nuts, and washers enable usage for the anchoring of cantilevers, for example. The sleeve anchor is installed in a time-saving push-through installation. During the installation, the cone is pulled into the expansion sleeve and expands it against the drill hole wall. The anchor is dismantled by means of a surface-flush removal in the case of temporary anchors.

Approx. 150 / Piece Get Latest Price

Product Brochure
Resin capsule RM IIThe bonded anchor for cracked concrete without drill hole cleaning

The fischer resin capsule RM II together with the threaded rod RG M is the first capsule with European Technical Assessment Option 1 for cracked concrete, which does not require hold cleaning. Steel constructions, machines or staircases outside and indoors can be fixed with the resin anchor. The resin capsule can be used with the fischer threaded rod RG M and the fischer internal threaded anchor RG MI. Hole cleaning is not necessary with the resin capsule RM II, however comparatively high loads can be supported. This allows for a fast work progress.

Approx. 1 / Piece Get Latest Price

Product Brochure
The fischer expansion plug S is the original. The plastic fixing is made from high-quality nylon and is particularly robust. The fischer expansion plug S is offered for fixings in drill diameters from 4 to 20 mm and therefore can be used in a variety of applications. The lean plug geometry simplifies installation. The characteristic anti-rotation locks prevent the plug from rotating as the screw is tightened. Wood or chipboard screws can be used to fix the object. The fischer expansion plug S is ideal for fixing light objects in concrete and solid masonry.

Approx. 200 / Piece Get Latest Price

Top Features

• With up to 3 embedment depths, it allows for the same screw to be used for different component thicknesses.
• The special saw tooth geometry enables fast cutting into the concrete.
• The approved adjustment for the concrete screws allows the screw to be unscrewed twice to align the attached part, and then to tighten the screw again.

 

Approx. 100 / Piece Get Latest Price

• Two screws allow for ideal adaptation to the outer pipe diameter.
• Loss protection of screw.
• Sound insulation insert.
• Connecting nut with combination thread M8 / M10.

Approx. 400 / Piece Get Latest Price

The fischer insulation support DHK is the economical plastic insulation support for soft insulation. The optimised geometry of the expansion section ensures a low anchorage depth and reduces the amount of drilling required. DHK is hammered in the push-through installation.