Hilti

Approx. 50 / Piece Get Latest Price

Product Brochure
Pre-assembled plastic anchor for concrete and masonry with screw (carbon steel, countersunk head)

• Base materials:  Concrete (aerated), Concrete (cracked), Concrete (uncracked), Masonry (grout-filled CMU), Masonry (hollow), Masonry (solid)
• Head configuration:  Countersunk
• Approvals / test reports:  ETA, Fire

Features

• Unbeatable versatility – flexible embedment depth (approved at 50 mm and 70 mm) makes these plastic anchors suitable for a vast range of fastenings and base materials
• Multiple versions available – choose from multiple screw heads and corrosion resistance options depending on your project’s needs
• Time-saving on the jobsite – these concrete plastic anchors arrive ready to use with the screw pre-assembled in the wall plug
• Extensive documentation available – see the technical data sheet for essential load, resistance, design and installation information

Applications

• Rainscreen/ventilated façades – fastening façade mounting brackets to concrete and masonry
• Metal fabrication – fastening handrails, balustrades, railings, window bars and other architectural metalwork to concrete and masonry
• Framed openings – countersunk screw ideal for fastening door and window frames
• Suitable for fastening fixtures up to 260 mm thick (60-310 mm anchor length available)

Approx. 200 / Piece Get Latest Price

Product Brochure
High-performance anchor rod for injectable hybrid/epoxy anchors (5.8 carbon steel)

• Material, corrosion:  Carbon steel, zinc-plated
• Base materials:  Concrete (cracked), Concrete (uncracked), Masonry (hollow), Masonry (solid)

Features

• Flexible embedment depths for maximum performance and high cost-efficiency
• Higher productivity – use of optimal rod length and diameter helps to save time and money with every fastening
• Universality – simplifies your anchor rod inventory by enabling use of the same rod for various applications
• Approvals – ETA approved system for flexible embedment depth for M8 to M30 rods
• Head marking – enables post-installation check for anchor setting (the head marking shows the rod length and steel grade)

Applications

• Fastenings in concrete and masonry in combination with the relevant Hilti HIT injectable adhesive mortar
• Applications where flexible embedment depths are required
• Head marking for easy verification of steel grade and rod length, even after installation
• Wide range of anchor rod diameters (M6-M30)

Approx. 8 / Piece Get Latest Price

Product Brochure
Economical manual-set drop-in anchor in metric standard sizes (without lip)

• Approvals / test reports:  N/A
• Material, corrosion:  Carbon steel, zinc-plated
• Base materials:  Concrete (uncracked)

BenefitsHKV(M6-M16)- Simple and well proven- Approved, tested and confirmed by every day jobsite experience- Reliable setting thanks to simple visual check- Versatile- For medium-duty fastening with bolts or threaded rods- Available in various materials and sizes for maximized coverage of possible applications

Basic loading data (for a single anchor)All data in this section applies to:- Correct setting (See setting instruction)- No edge distance and spacing influence- Concrete as specified in the table- Minimum base material thickness- Concrete C 20/25, fck,cube = 25 N/mm²

Approx. 35 / Piece Get Latest Price

Product Brochure
HSV is mechanical anchor. Anchor bolt for Push through Installation. When Hexagon nut is tightened, the tapered bolt is pulled into the expansion clip and expands in against the hole wall.

 

Approx. 80 / Piece Get Latest Price

Product Brochure
Features

• First ETA-compatible stud anchor for torque-controlled setting using an impact wrench and Hilti torque bar for higher productivity in serial applications
• Excellent edge and spacing distances
• 3 embedment depths offering maximum flexibility

Approx. 14 / Piece Get Latest Price

Product Brochure
Economical plastic anchor for frames (countersunk head). Best Suited for Window and door frame fixing.

Approx. 1,300 / Piece Get Latest Price

Product Brochure
Economical injectable epoxy mortar for anchoring in concrete

• Base materials:  Concrete (uncracked)
• Base material condition:  Dry, Wet
• Seismic loading:  No

Features

• The economical injection mortar solution that can replace virtually all grout fastenings
• Suitable for post-installed rebar and concrete anchoring applications in accordance with Hilti technical data
• Compatible with Hilti’s full range of accessories (e.g. cordless electric dispenser, steel brushes, piston plug)
• Available in 580 ml hard cartridge, suitable for use under severe on-site conditions
• Allows flexible installation due to the long working time

Applications

• Substitution of misplaced/missing rebar
• Connection of secondary post-installed rebar (e.g. staircases, upstands)
• Renovation/upgrading of post-installed rebar
• Rebar dowelling
• Anchoring non-structural secondary steel elements (e.g. columns, beams)

Approx. 150 / Piece Get Latest Price

Standard anchor rod for injection (4.8 CS)

• Material, corrosion:  Carbon steel, zinc-plated
• Base materials:  Concrete (cracked), Concrete (uncracked), Masonry (hollow), Masonry (solid)

Features

• Productivity: use of optimal rod length and diameter saves time and money with every fastening
• Flexible embedment depths for maximum performance and high cost-efficiency
• Easy to install – no setting tool required
• One anchor rod for all types of Hilti HIT injectable adhesive mortar

Applications

• Suitable for fastenings in concrete and masonry in combination with the relevant Hilti HIT injectable adhesive mortar

Approx. 4,500 / Piece Get Latest Price

Product Brochure
Features

• Self-sharpening cutting edge – work more efficiently and for longer with the same chisel, no resharpening or rehardening necessary
• Ultra-robust – inductive hardening makes these flat chisels especially resistant to mushrooming, wear and bending
• Improved reliability – dust cap helps to avoid downtime and improve tool lifespan
• Certified quality – developed using ISO certified processes and more than 30 years of expertise in chisel design and production
• Multiple lengths available – use shorter bits for best energy transmission and increased longevity, and longer ones for piercing deeper or reaching into tight spaces