Ram Nath And Sons

• The FBN II achieves maximum load-bearing capacity with standard anchorage depth. This means: fewer fixing points and smaller anchor plates.
• If the reduced anchorage depth is used, then this lowers the drill hole depth and simplifies installation.
• Component tolerances are balanced out with the long thread. In addition, FBN II is also suitable for stand-off installations. This increases flexibility.
• Simple assembly due to few taps and minimal slippage.
• The drive-in pin protects the thread from damage. This saves time during installation and removal.

• FIS EP is the economical epoxy resin mortar for applications in concrete that do not require approval.
• The epoxy mortar FIS EP can also be used in cracked concrete for construction site convenient installation.
• With the anchor rod FIS A, the loads to be introduced can be selected variably by choosing the anchorage depth.
• FIS EP can be used for smooth installation with the standard fischer accessories.

The fischer frame fixing SXR is a plug made from high-quality nylon. Thanks to its special plug geometry, the SXR can be used in solid and hollow building materials. Due to the low anchorage depth of just 50 mm, the frame fixing can work particularly cost-effectively. The low drill hole depth saves time and reduces bit wear. 

The fischer bolt anchor FAZ II is a steel anchor for the highest requirements. Heavy loads can be secured in cracked concrete using the steel anchor. Thanks to its easy installation, the FAZ II can be used extremely flexibly. The tried-and-tested expansion clip safely introduces the loads into the concrete and enables top load-bearing capacity. The steel anchor is ideal for the anchoring of railings, cable trays and cantilevers, for example.

• Tested and adhered according to EN 10088:2004 for A4 and EN ISO 4042 for A2 clamps, makes it last longer
• Suitable for the clamping range from 50mm to 120mm stand-off installation
• Minimum clamp thickness is 5mm
• 24mm slot for easy adjustment during stone alignment
• Compatible anchor fasteners available for concrete, brickwork, Sand lime blocks & ACC

• The standard anchorage depth achieves high load-bearing capacities. This means that fewer fixing points and smaller anchor plates are required.
• The reduced anchorage depth reduces the drill hole depth. This minimises the amount of time needed for installation whilst increasing flexibility.
• Available with metric and imperial threads.

• Pipelines and ventilation ducts
• Sprinkler systems
• Cable conduits and wires
• Gratings
• Steel constructions
• Machines
• Consoles
• Shuttering props

• Concrete C20/25 to C50/60, cracked, for the multiple fixings of non-load-bearing systems
• Concrete C20/25 to C50/60, non-cracked
• Also suitable for:
• Concrete C12/15
• Natural stone with dense structure

• The special functioning allows for use in solid and hollow building materials with an anchorage depth of just 50 mm, ensuring an economical fixing.
• The ETA assessment covers use in a range of solid and hollow building materials and guarantees a secure fixing.
• The specially developed combination of plugs and screws ensures the very best handling. The plug has a noticeable hold, making installation more convenient.

• ^{Low anchorage depth saves time and costs.}
• ^{ETA approval in concrete and masonry.}
• ^{With pre-mounted safety screw with countersunk head.}
• ^{Plug expands in solid building materials.}
• ^{The plug anchors itself in the cavity in perforated building materials.}

• The special functioning allows for use in solid and hollow building materials with an anchorage depth of just 50 mm, ensuring an economical fixing.
• The ETA assessment covers use in a range of solid and hollow building materials, and guarantees a secure fixing.
• The specially developed combination of plugs and screws ensures the very best handling. The plug has a noticeable hold, making installation more convenient.

• ^{The special functioning allows for use in solid and hollow building materials with an anchorage depth of just 50 mm, ensuring an economical fixing.}
• The ETA assessment covers use in a range of solid and hollow building materials, and guarantees a secure fixing.
• The specially developed combination of plugs and screws ensures the very best handling. The plug has a noticeable hold, making installation more convenient.

The fischer anchor rod RG M is a system component for use with the fischer resin capsules RSB and RM II and the fischer injection mortars FIS SB, FIS EM, FIS EB, FIS V, FIS VL, FIS P Plus, FIS P, and FIS GREEN. Due to the oblique edge, it is particularly suitable for use with the resin capsules RSB and RM II. The extensive assortment in diameters M8 - M30 and in different steel grades enables extremely diverse applications. The system is particularly suitable for the cost-effective fixation of railings, steelwork constructions, and advertising systems both inside and outside. The RG M is set with the bonded anchor setting tool and a hammer drill using rotating and hitting motions. During the resin capsule setting process, the capsules are destroyed by the characteristic oblique edge and are mixed, and the mortar is activated. The approvals of the various resin capsules and injection mortars must be observed.

• Easy to insert into the drill hole thanks to undersize

• High shear loads

Removable