The silane technology of the fischer injection mortar FIS SB enables a really high bond strength and therefore a really high load level. The European Technical Approval for cracked and non-cracked concrete and for seismic loads offers added safety. The fischer injection mortar FIS SB is suitable for use with the system components for fixation both inside and outside.The variable anchorage depths optimise the installation time and use of materials. The application temperatures range from -15° to +150° C depending on the mortar variant.

Pure Epoxy Styrene Free

Good Quality and High Strength

Specification

Material: Pure epoxy resin

Size: 400ml,

Mixing ratio: 3:1(400ml);

Mixing color: Orange(400ml)

Shelf life: 18 months.

Standard package: One cartridge with two mixer

Other accessory: Mixer, caulking gun,

Application

Tropical area.

Anchoring in large hole diameter, deep

holes and diamond drilled holes

Large construction sites (infrastructure, civil projects, bridge, tunnel).

GU-500 provides rapid cure with adequate

Features

Non-Drip.

Styrene free and low odor with VOC(Volatile Organic Compounds).

No shrinkage, pressure and expansion.

High grip force, high adhesive force.

working time in temperate climates. 

Drop-In Anchors are internally threaded anchors for bolts and threaded rods. These are zinc plated steel tubular expansion shield and a solid, cone-shaped expander plug. The shield has four equally placed slots for a portion of its length. The shield also has a smooth, flangeless top that allows for either flush or countersunk installation. The bottom lip of the shield is tapered to allow maximum depth and holding power.

Application

1.      Pipe suspension

2.      Air-conditioning and Ventilation Installations

3.      Drain Covers

4.      Sprinkler Systems

5.      Consoles

6.      Platforms

7.      Plumbing

8.      Steel Constructions

9.      Gratings

10.   Cable Trays

11.   Facades

12.   Suspended Ceilings

Installation

How to Install :

1.      Select the right plug size.

2.      Drill a hole in the concrete using a hammer drill and carbide tipped masonry drill bit matching the bit size with the outside diameter of the drop-in anchor being used. Make sure the hole depth exceeds the minimum embedment depth.

3.      Clear all the debris or drilling dust from the hole.

4.      Drive the anchor into the hole until it is flush with the surface of the concrete.

5.      Using proper sized setting tool, expand the anchor setting tool into the anchor followed by several hammer blows.

6.    Proper installation can be verified when the shoulder of the setting tool is flush with the top of anchor.

7.

The fischer bolt anchor FAZ II is a steel anchor for the highest requirements. Heavy loads can be secured in cracked concrete using the steel anchor. Thanks to its easy installation, the FAZ II can be used extremely flexibly. The tried-and-tested expansion clip safely introduces the loads into the concrete and enables top load-bearing capacity. The steel anchor is ideal for the anchoring of railings, cable trays and cantilevers, for example.